Industrial computer manufacturers talk about common faults and solutions of industrial computer

Industrial computer is a general term for tools that use a bus structure to detect and control the production process, electromechanical equipment, and process equipment. Industrial personal computers have important computer attributes and characteristics, such as computer CPU, hard disk, memory, peripherals and interfaces, as well as operating systems, control networks and protocols, computing power, and friendly human-machine interface. Guangzhou Belite, an industrial computer manufacturer. Industrial personal computers often run in harsh environments and have higher requirements for data security. Therefore, industrial personal computers are usually specially designed for reinforcement, dust-proof, moisture-proof, corrosion-proof, and radiation-proof. The main categories of industrial computers are: IPC (PC bus industrial computer), PLC (programmable control system), DCS (distributed control system), FCS (field bus system) and CNC (numerical control system).

In the actual use process, the industrial control machine has some failures due to hardware or software problems. The reasons for the failure can be roughly divided into five categories: First, the failure caused by the use environment, including unstable power supply, electromagnetic interference, high or low working environment temperature , even lightning strikes and other factors; second, software failure; third, failure caused by normal aging; fourth, electrical connection failure; fifth, human failure. Industrial computer manufacturer Guangzhou Belite Technology teaches you how to troubleshoot problems:

1. Check whether the connection of the industrial computer is correct and whether the power socket has electricity;

2. Check the power supply of the industrial computer, whether the power supply fan can work normally after the power is turned on, and whether the connection between the display and the host is correct;

3. If the power supply is normal, open the case cover to check whether the power cord is properly connected to the baseboard or mainboard of the industrial computer, whether the connection between the baseboard and the mainboard is loose, whether the power-on backplane or the mainboard is powered on, and whether the ATX power supply is wired incorrectly;

4. If the connection is normal, unplug the memory stick and turn it on to see if it alarms;

5. If there is no alarm, please replace the CPU or motherboard.