How to reinstall the operating system of the tablet industrial computer?

The entire operation process of the industrial computer is likely to have system poisoning or system jams that cannot be repaired. In this case, the operating system must be reinstalled. So, do you know how to reinstall the operating system?

1. The method of reinstalling the portable industrial computer GHOST.

The Right Spot: This method works with the tablet's operating system where everything works today, and you have the system GHOST system (the GHOST system's manufacturing method will not be described in the text and will be detailed later). Operation process: copy the GHOST system to another controller number other than the C drive, then apply the GHOST recovery tool (many online, just the next one), then run the tool, select the GHOST file and repair the hard disk (usually the default setting is C Disk), click [Clear], the system restarts to automatically install.

2. The method of reinstalling the system by running the U disk of the tablet industrial controller.

Appropriate on the spot: This method is suitable for industrial production IPCs running BIOS can be loaded normally, the operating system can be loaded normally.

Process: Prepare a USB flash drive in advance, then download the corresponding operating system version number for free from the Internet technology, and then use the USB flash drive to make tools (many online, no less than dozens, you can search by yourself, each one The tools are similar) to make and run the U disk, then insert the U disk into the USB interface of the tablet computer, the device can restart and enter the installation page, which can be carried out step by step. After doing this method, it is very likely that some problems that the driver software cannot find will occur. You can contact your dealer to search for hardware configuration driver software.